CNC Seig X2, Руководство по сборке

Страница: 10 / 35

To remove the rack gear, you will first need to remove the
spindle motor and mount from the headstock, There are 4
bolts that you will need to remove that are located on the
top of the motor mounting plate.
Gently, and carefully, raise the spindle motor and mount
from the head. Be extra careful not to drop it or you may
pull the wires from the electronics box or the motor itself.
You will need something to set the motor on while you
remove the rack. This is an extremely important step!!!!
Start with the head in the lowered position exposing two
of the screws that hold the rack in place
Finally, there is a headstock stop that must be removed as
well.