CNC Seig X2, Руководство по сборке

Страница: 20 / 35

Now, install the X axis ball screw and
nut. This is the point where you
need to decide which side of the
table that you want to mount the
stepper motor. This is shown with a
left sided mount. If you decide to
mount it on the right side, you will
need to remove the ball nut from
the screw and reverse. To do so you
must be very careful when removing
the nut so the balls inside do not fall
out or become trapped in one of the
recirculation paths. Please refer to
this video on removing and
reinstalling the nut.