4.0
Start-up the finished control card
The commissioning of the control card includes an interaction of electronic components and settings
in the control software of your machine, here EstlCam.
4.1
Limit switches and Inductive sensors
Figure 4.1.1
The control card allows the connection of one limit switch or inductive sensor at the X, Y and Z
axes. The switches, together with the control software, ensure that your machine only travels
within defined limits. This effectively prevents damage to your machine in case of faulty
G-code instructions.
The limit switches are connected to the control card according to the following scheme:
Figure 4.1.2
The figure shows the connection of the limit switches with inverted setting in the Estlcam
software. If the limit switches are closed, this is shown in the software under "triggered".
