4.8
Outputs A1, A2-Water pump and laser
Figure 4.8.1
Via the outputs 1 and 2 you have the possibility to switch devices such as
coolant pumps or a laser, the application is as diverse as you have ideas.
Open „View->CNC controller(F2)“.
Turn on the checkboxes, "Output 1" and "Output 2".
Figure 4.8.2
You can switch the outputs as in figure 4.8.2 manually in the EstlCam software or during the
G-Code execution as follows:
● M8 Output 1 on
● M9 Output 1 off
● M10 Output 2 on
● M11 Output 2 off
When you switch an output to ON, the respective screw te 5VDC is connected, so you
have the possibility to switch solid state relays or a power MOSFET.
In the following schematic presentation we will show the possibility to switch a water pump
and a laser.
