Operating Instructions
T-Rex-Series
CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 71
Support: +49 (0)2831/91021-50
31.03.2014
1 0
Dismantling and disposal
Once the maximum lifetime of the machine is reached, the machine must be dismantled and
environmentally friendly disposed.
•
Disassembly should only be performed by qualified personnel.
•
Work on the electrical system may only be performed by qualified electricians.
1 0 . 1
S a f e t y r e g u l a t i o n s f o r t h e d i s a s s e m b l i n g a n d d i s p o s a l
Improper disassembling
WARNING:
Risk of injury from incorrect disassembly!
Residual stored energies, angular components, peaks and corners on or in the
machine or on the required tools can cause injury.
•
Before starting any work ensure sufficient space.
•
Take care with sharp-edged components.
•
Maintain order and cleanliness in the workplace! Loosely stacked or
scattered components and tools are accident sources.
•
Disassemble components professionally. Note partially high weight of the
components. If necessary, use lifting equipment.
•
Secure components so they do not fall down or fall over.
•
•If in doubt consult the manufacturer
1 0 . 2
D i s a s s e m b l i n g
Before beginning with dismantling:
•
Switch off the machine and secure against restart.
•
Discharge all power supply from the machine, physically separate stored residual energy.
•
Remove the operating and auxiliary materials and residual processing materials and dispose
environmentally friendly.
Then clean modules and components in a professional manner and in accordance with applicable
local safety and environmental regulations.
