Operating Instructions
T-Rex-Series
CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 59
Support: +49 (0)2831/91021-50
31.03.2014
Environmental protection
Observe the following instructions to protect the environment during maintenance:
•
On all lubrication points which are supplied with lubricant by hand, remove escaping,
used or excess grease and dispose in accordance with applicable local regulations.
•
Decant oils in suitable containers and dispose according to local regulations.
•
Catch oil / fat-containing cloths in suitable containers and dispose according to local
regulations.
8 . 2
S p a r e p a r t s
WARNING:
Risk of injury due to using unapproved replacement parts!
The use of incorrect or faulty spare parts can lead to hazards to personnel and
malfunction or failure of the machine.
•
Only use original spare parts from the manufacturer or manufacturer-
approved replacement parts.
•
If in doubt always contact the manufacturer.
Loss of warranty
The use of non-approved spare parts invalidates the manufacturer's warranty.
Obtain spare parts from authorized dealers or directly from the manufacturer.
The spare parts list is available on request.
Specify following points when ordering spare parts:
➢
Type
➢
Year built
➢
Serial no.
➢
Version
➢
Amount
➢
Identification
➢
desired delivery method (mail, cargo, sea, air, express)
➢
shipping address
Spare part orders without above information will not be considered. If no specification is made
regarding the shipping method, shipping will be at the discretion of the supplier.
