Operating Instructions
T-Rex-Series
CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 67
Support: +49 (0)2831/91021-50
31.03.2014
Improperly executed fault elimination
WARNING:
Risk of injuries caused by improper fault elimination!
Improperly performed work and troubleshooting can cause serious injury and
considerable damage to property.
•
Before starting any work sufficient installation freedom has to be given
•
Maintain order and cleanliness at the installation site! Loosely stacked or
scattered components and tools are accident sources.
•
• If components have been removed, ensure correct assembly, reinstall all
fasteners and tighten with screw tightening torques.
Note the following before restarting:
➢
Ensure that all work and troubleshooting according to the information and
instructions in this manual have been carried out and completed.
➢
Ensure that there are no persons in the danger zone.
➢
Ensure that all covers and safety devices are installed and working
properly.
Response to malfunctions
1
For malfunctions that constitute an immediate danger to persons or property, immediately
initiate emergency stop
2
Determine cause of malfunction.
3
If the troubleshooting requires work in the danger area, turn off the machine and secure against
reconnection.
Inform responsible about disorder immediately
4
Depending on the type of disorder this can be eliminated by authorized personnel.
The fault table listed below provides information about who is entitled to eliminate
the fault.
