Operating Instructions
T-Rex-Series
CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 22
Support: +49 (0)2831/91021-50
31.03.2014
2 . 8
E n v i r o n m e n t a l p r o t e c t i o n
HINT:
Risk for environment caused by carelessly handled hazardous
substances!
Handling with hazardous substances can be dangerous for the environment
if handled carelessly, especially when disposed wrong. This can cause
severe damages to the environment.
•
Please pay attention to the correct handling and disposal of below
mentioned hazardous substances.
•
If environmentally hazardous substances are accidentally released
into the environment, take suitable measures immediately. In case of
doubt inform the responsible local authority of the damage
Lubricants
Lubricants, such as grease and oils, contain toxic substances. They must not
reach the environment. The disposal must be taken place by a specialised waste
management company.
Gear oil
Gear oil contains many toxic substances. They must not reach the environment.
The disposal must be taken place by a specialised waste management
company.
Cooling emulsion
Cooling emulsion may contain toxic and polluting substances such as glycol.
They must not reach the environment. The disposal must be taken place by a
specialised waste management company.
2 . 9
S i g n a g e
Following symbols and signs are found in the working area. They apply to the immediate
neighbourhood in which they are displayed.
WARNING:
Risk by illegibly signage!
Over the years stickers and signs may become dirty or defaced in any other way; so
that hazards are not recognized and necessary operating instructions have been
adhered This is a risk of severe injury!
•
Always keep safety, warning and operating instructions in a well legible
condition.
•
Immediately replace damaged or obliterated signs or labels.
