Club Car Precedent Villager 2, Руководство по техническому обслуживанию и ремонту, Страница: 349 / 414

GASOLINE VEHICLE - FUEL SYSTEM Fuel Pump Module
21
6. Connect fuel line (3) to fuel pump module (1). See Fuel Line Installation on page 21-18. See following
DANGER.
DANGER
• Ensure line is connected properly to avoid a leak that can cause a fire.
• Make sure fuel line is the correct length and properly routed. Failure to heed this warning could
result in damage to fuel line and fire.
7. Connect wire harness plug (2) to fuel pump module (1).
8. Clean spilled and remove any drained gasoline from the area.
9. Connect battery.
See Connecting the Battery- Gasoline Vehicles on page 1-3.
10. Place the Forward/Reverse handle in the NEUTRAL position, chock the wheels, and the neutral lockout switch in
the MAINTENANCE position
(Figure 24-1, Page 24-1) .
11. Turn key switch to the ON position and check for fuel leaks. Repeat as necessary to build fuel pressure. Any
leaks found must be fixed.
DANGER
• Repair all fuel leaks before returning the vehicle to service.
12. If no leaks are found, place the neutral lockout switch in the OPERATE position (Figure 24-1, Page 24-1) .
2019 Precedent Villager 2 Maintenance and Service Manual Page 21-21