Club Car Precedent Villager 2, Руководство по техническому обслуживанию и ремонту

Страница: 344 / 414

21
Air Intake System GASOLINE VEHICLE - FUEL SYSTEM
5. The air cleaner (1) is secured to the fuel bucket with screws (2). Access to the screws requires that the kick plate
be removed.
See Kick Plate Removal on page 4-10.
AIR INTAKE SYSTEM INSTALLATION
WARNING
• Intake hose (3) is made from a special fire retardant neoprene material. Use of any hose that does
not meet Club Car, LLC specifications could create a fire hazard.
• Improper orientation of the hose clamp (5) may result in fuel tank damage (Figure 21-11, Page 21-16).
1. Position air cleaner (1) inside the fuel bucket (Figure 21-9, Page 21-14) . Secure with screws (2). Tighten
screws to 2.7 ft·lb (3.5 N·m).
2. Install hose (3) on air cleaner (1) and secure with clamp (4).
3. Install hose (3) on throttle body and secure with clamp (5) oriented as shown (Figure 21-11, Page 21-16)
with tabs up.
4. Install kick plate. See Kick Plate Installation on page 4-10.
5
3192
Figure 21-11 Hose Clamp Orientation at Throttle Body
Page 21-16 2019 Precedent Villager 2 Maintenance and Service Manual