CLIVET WSAN-YMi 21, Руководство по установке, использованию и обслуживанию

Страница: 86 / 156

86
Use UP DOWN to scroll and set the phone number.
The maximum length of the phone number is 13 digits, if the
length of phone number is short than 12, please input *, as
shown below:
The number displayed on the user interface is the phone
number of your local dealer.
Restore factoruìy settings
The RESTORE FACTORY SETTING is used to restore all the
parameters set in the user interface to the factory setting.
To restore factory settings, go to MENU > FOR
SERVICEMAN > RESTORE FACTORY SETTINGS.
Press OK.
The following page is displayed:
Use UP DOWN to scroll to the mode you want to run and
press OK.
The unit will run as selected.
If POINT CHECK is selected, the following page will appear:
Use LEFT RIGHT to scroll the cursor to YES and press OK.
The following page will be displayed:
TEST RUN is used to check correct operation of the valves,
air purge, circulation pump operation, cooling, heating and
domestic water heating.
How to enter test run
To enter test run, go to MENU > FOR SERVICEMAN > TEST
RUN.
Press OK.
The following page is displayed:
After a few seconds, all the parameters set in the user
interface will be restored to factory settings.
Test run
If YES is selected, the following page is displayed:
10 START-UP AND CONFIGURATION