CLIMAVENETA W3000 compact, Техническое руководство

Страница: 66 / 104

C0240111-04-05-GB
>AI 2
Displays analogue input 2
> > 17.9
value
>AI 3
Displays analogue input 3
> > 25.3
value
>AI 4
Displays analogue input 4
> > 30.2
value
>AI 5
Displays analogue input 5
> > 24.5
value
>AI 6
Displays analogue input 6
> > 24.5
value
>AI 7
Displays analogue input 7
> > 0
value
>AI 8
Displays analogue input 8
> > 0
value
>AO 3
Displays analogue output 3
> > 70
value expressed in Volts
>AO 4
Displays analogue output 4
> > 80
value expressed in Volts
SETP
Setpoint menu
>MODE
The submask is used to set the operating mode (this depends on the machine type set in the
manufacturer menu using the W3000-compact keypad)
> > CH
"CH"= Chiller, "HP"= heat pump
409
>ACT
The submask displays the percentage of active power of the thermoregulator
> > 50
value ranging from 0 to 100
>SUM
(If the FLOW parameter in the user menu is set to inlet). The submask is used to set the
summer setpoint with inlet adjustment
> > 11.0
expressed in degrees centigrade 410
411
>SUM
(If the FLOW parameter in the user menu is set to outlet). The submask is used to set the
summer setpoint with outlet adjustment
> > 9.5
expressed in degrees centigrade 413
>UIN
(If the FLOW parameter in the user menu is set to inlet). The submask is used to set the winter
setpoint with inlet adjustment
> > 0
expressed in degrees centigrade
412
>UIN
(If the FLOW parameter in the user menu is set to outlet). The submask is used to set the winter
setpoint with outlet adjustment
> > 0
expressed in degrees centigrade 414
Unit menu
>EVIN
Displays evaporator inlet temperature
>EVO1
Displays evaporator 1 outlet temperature
(If evaporator 2 is present). Displays evaporator 2 outlet temperature
>CDIN
(If condenser is present). Displays condenser inlet temperature
>CDO1
(If condenser is present). Displays condenser 1 outlet temperature
(If the temperature probe is present and if it is enabled in the manufacturer menu). Displays
external temperature
> > 0
expressed in degrees centigrade
high pressure value
>HP2
Displays circuit 2 high pressure
> > 0
high pressure value
>AO 3
Displays value of analogue output 3
> > 0
value expressed in percent
>AO 4
Displays value of analogue output 4
value expressed in percent
>HH 1
Displays compressor 1 operating hours expressed in thousands
UNIT
>EVO2
>CDO2
(If condenser 2 is present). Displays condenser 2 outlet temperature
>EHT
>HP1
Displays circuit 1 high pressure
> > 0
> > 0
66