CLIMAVENETA W3000 compact, Техническое руководство, Страница: 19 / 104

C0240111-04-05-GB
x
Disconnect the connector J10 connecting the keyboard on the unit with the card,
and connect it to connector “A” of the “T” shunt (see figure 3.5).
x
Connect connector J10 on the card to connector “B” of the “T” shunt.
The correct configuration is shown in figure 3.5:
C
B
A
A C
B
Figure 3.5 : connecting the remote keyboard (for distances less than 200 metres)
2. If a remote keyboard monitors more than one unit , the above configuration may only be
used for the last card in the network (the nearest to the remote keyboard).
x
REMOTE KEYBOARD FROM 200 metres UP TO 500 metres
N.B.: The remote keyboard cannot be installed more than 500 m away.
If the remote keyboard must be installed over 200 metres away from the plan network, a power
unit must be installed near the remote keyboard. The only difference between this and a remote
keyboard up to 200 metres is that the power unit must be to terminals 1 and 2 of the T shunt
(the one near the remote keyboard)
The connection diagram is:
19