ClimateMaster AVB32V03R, Руководство пользователя и инструкции по установке

Страница: 79 / 88

71
Installation Instructions
The TouchScreen thermostat backplate
To remove the thermostat backplate:
Using the Finger Pull Areas, pull the
front housing away from the backplate.
Look for these tabs to locate
the pull areas
Pull out with thumbs in these areas
Backplate
Front Housing
NOTE:
The backplate does not fully
cover a full size vertical junction
box. The ACC-WPLWH
ClimateMaster Wallplate or a
single-gang, horizontally
mounted junction box would
be needed for that type of
installation
D/H W O SENSOR
WIRE TERMINAL FUNCTIONS
The table on page 70 shows how to wire to either a heatpump or
conventional system and explains the function of each terminal. Note that
the use of the O and W terminals vary depending on equipment type. The O
terminal drives the reversing valve for a heatpump but since that function
isn’t applicable for a conventional system, O becomes the first stage of
gas or electric heat. Similarly, W drives a single stage of strip heat in a
heatpump system but is used as second stage of gas or electric heat in a
conventional system.