Cleveland APD, Инструкция по установке, эксплуатации и обслуживанию, Страница: 3 / 26

PAGE 1
RXT & APD AGITATOR MANUAL_09-17-15_JN
document the issue.
damage. Once you've contacted the carrier, please contact Cleveland Mixer so we can
delivered with visible damage, please contact the carrier to report the missing pieces or
correct number of skids, crates and cartons. If any of the shipment was not delivered or
Make sure to check the packing slip for your shipment to make sure you've received the
assembly.
discard any packing crates or materials until you've accounted for all the parts of your mixer
mixer accessories may be packed in boxes inside of crates or bolted down to skids. Do not
such as impeller blades, hubs, couplings, steady bearings, seals, keys, hardware and other
Be sure to use care when uncrating, unpacking, lifting and handling your mixer. Certain parts
RECEIVING AND UNPACKING YOUR MIXER
them on a level surface preferably indoors or
in a clean dry location.
Some mixer parts such as shaft pullers are
supplied to perform future maintenance.
Cleveland Mixer suggest labeling these parts
and putting them into storage.
The weight of the mixer will be indicated on
the mixer's assembly drawing and also in the
shipping documents. It's important that the
mixer be moved and installed by
professionals. Any attempt to lift or move the
mixer by an unqualified party can result in
serious injury and catastrophic damage to the
mixer.
The drive end of the mixer might be top
heavy. Never upright a mixer drive without the
proper bracing. Doing so might result in the
drive falling over and causing injury or
damage to equipment.
Never lift the drive end of the mixer by the
motor. Make sure when lifting shafting to keep
the ends level so not to bend the shafting.
After uncrating the mixer and parts, stage
Cleveland Mixer suggests checking
your unpacked mixer assembly parts
against your packing slip and
assembly drawing to make sure
everything is accounted for before
assembling your mixer.