Cleveland APD, Инструкция по установке, эксплуатации и обслуживанию, Страница: 15 / 26

RXT & APD AGITATOR MANUAL_09-17-15_JN
PAGE 12
LOWER SHAFT PARTS
The lower shaft
components such
as lower and
intermediate shaft
sections, hubs and
blades should be
staged inside the
tank prior to
installing the
mixer. If the the
lower and
intermediate shaft
sections are too
large and heavy
to lift without a
crane, you might
need to construct
scaffolding inside
of the tank to
support their
weight.
SHAFT CATCHER
The Cleveland Mixer shaft catcher is a two piece split collar that tensions around the
shaft by tightening down on the 4 cap bolts to lock the catcher in place. Once
tightened around the shaft, the catcher should be able to support the weight of the
shaft (only). It is not designed to support additional weight of impellers or multiple shaft
sections. You might not have been supplied with your order. It is a separate
component designed to aid in installation of shafts for top entry mixers. If you need a
shaft catcher for installation, please contact Cleveland Mixer to order.
When preparing to install your
mixer on your tank, take a
moment to gather all of the
assembly parts and tools you'll
need. Once the mixer and
shaft(s) are suspended, it will
be difficult and possibly
dangerous to halt the
assembly procedure. It's best
to have a complete plan and
all parts accounted for before
beginning the process and
raising the mixer components
off the ground.