Clementi FAMILY Series, Руководство пользователя

Страница: 53 / 59

104 105
10.
Insert the 2 handles (Table 3, fig. 11) on the left side of the cart by
passing them through the handle supports assembled previously.
Insert the screw on the inner end of each handle to stop them from
completely coming out when moving the oven.
11. Fix the logo (Table 3, fig. 13)
on the left front leg of the
trolley using the supplied
screws.
DETTAGLIO
SCALA 1 : 5
1°
2°
DETTAGLIO
SCALA 1 : 5
3°
materiale:
progetto: descrizione:
codice:
disegnatore:
data:
18/03/2021
ASSIEME FORNO
PULCINELLA
F00041
CLEMENTI snc
zona Ind. Berbentina, 8
60041 - Sassoferrato (AN)
Tel. 0732-959862
Fax 0732-959796
diego@clementiforni.it
rev:
0
NOTA REV
0
spessore:
AUTORE DATA
scala:
1:20
A3
C. Tinti
ENG
ASSEMBL
Y
INSTRUCTIONS FOR POSITIONING THE OVEN
PLEASE NOTE: For easier movement when you initially position your oven you
can remove the cooking bricks. You can then place these back in the oven follow­
ing the diagrams on page 28.
The smoke outlet also has a bar for lifting the oven with a mechanical aid such
as a hoist or similar. Alternatively, the oven has two channels accessible in all four
corners where it is possible to place metal support arms (NOT INCLUDED) to lift
the oven in to position. It is recommended that 4 persons lift the oven when lifting
with metal bars.
It is recom mended to carefully evaluate the feasibility of any manual or mechani­
cal move ment before any attempt is made.
The Clementi company assumes no responsibility for damages to persons or prop­
erty caused by the movement of the oven or its components
ENG
ASSEMBL
Y