Cleaver Scientific CSL-RVMSCHOICE10, Инструкция по эксплуатации

Страница: 10 / 25

15/11/2018 Page 8
3. Peel the back off the loading guide and carefully apply the loading
guide directly to the gel platform.
The unit is now ready to be used.
Control Interface
There are five buttons and four LED indicators on the faceplate.
Each LED indicates the activation status or mode of operation of the unit.
1. To select Voltage, Current or Time
2. To switch blue light ON or OFF
3. Increase selected parameter
4. Decrease selected parameter
5. Start / stop the program
To set the required voltage, current and time, use the mode button to
navigate between these parameters. The active parameter will be indicated
by a lit LED.
Use the up and down arrows to set the desired parameters.
Press the Start / stop button to start the electrophoresis run.
To activate the blue light for 10 seconds, press the blue light button once. To
permanently activate the blue light, hold the Blue light button for 3 seconds.