Cleaver Scientific CSL-RVMSCHOICE10, Инструкция по эксплуатации

Страница: 5 / 25

15/11/2018 Page 3
Safety Information
The runVIEW real-time horizontal DNA electrophoresis system has been
thoroughly tested and found to comply within the limits of CE regulation. It
has been manufactured using the latest technology and does not require
maintenance. When used correctly this unit poses no particular health risk,
although it can deliver dangerous voltage levels if used incorrectly.
Accordingly, this power supply must only be operated by fully qualified
personnel adhering to the guidelines laid out within this instruction manual.
Although this power supply is equipped with all necessary safety features
against abuse and accidental failure, caution should always be exercised
when working with high voltage equipment. Any individual intending to use
this instrument should read the entire manual thoroughly before operation.
1. Read the instruction manual thoroughly before use.
2. Never touch the power outlets with any conductive object (e.g. naked
metal wire) other than properly insulated power supply cables.
3. Do not spill liquid or insert metal objects inside the power supply.
4. Never block the ventilation holes or place the unit in any enclosure
unless there is adequate ventilation; never expose the power supply to
a direct heat source.
5. Never touch any part of the power supply assembly (i.e. power supply,
cables or electrophoresis tank) before switching OFF the power supply.
6. Never manipulate with wet hands.
7. Do not connect to ground any of the power outputs or the buffer within
the electrophoresis tank; the power outputs should be only connected
to an insulated electrophoresis tank equipped with a safety cover.
8. Do not connect any power supplies in series or in parallel.
9. Never open the back plate nor remove the cover, otherwise an
electric shock may result. Repairs should only be made by the
manufacturer or a service technician authorised by the manufacturer.
10. Never use this power supply if the safety cover is not in position
correctly.
11. Do not use the unit if there is any sign of damage to the external tank or
cover. Contact the manufacturer or supplier immediately to replace or
repair any damaged parts.