Visit
www.ClearSpan.com
for additional products and customer assistance.
CLEARSPAN
™
POLY BUILDINGS
4
REQUIRED TOOLS
The following list identifies the main tools needed to
assemble the shelter. Additional tools and supports may be
needed depending on the structure, location, and
application.
• Tape measure or measuring device
• Fine point marker to mark the location on tubing
• Variable speed drill and impact driver (cordless with
extra batteries works best)
• Wrenches or ratchet and socket set (recommended)
• Scissors or utility knife to cut cover material and strap
• Tool to cut cable to the required length
• Hammers and gloves
• Ladders, work platforms, and other machinery for lifting
designed to work safely at the height of the shelter
• Rope (or straps) for cover installation
UNPACK AND IDENTIFY PARTS
The following steps help ensure that you have all the
necessary parts
before
you begin.
1. Unpack the contents of the shipment and place where
you can easily inventory the parts. Refer to the Bill of
Materials/Spec Sheets.
2. Verify that all parts listed on the Bill of Materials/Spec
Sheets are present. If anything is missing or you have
questions, consult the Pictorial Parts Guide and all
shelter diagrams throughout these instructions for
clarification, or contact Customer Service.
NOTE:
At this time, you do not need to open the plastic
bags containing the fasteners (if used).
QUICK START GUIDE
For a quick overview of this shelter and its components,
consult the Quick Start Guide near the back of these
instructions.
The pages of the Quick Start Guide show exploded views
of all critical connections. Use the diagrams in the Quick
Start section to assemble the building frame.
Consult the remainder of these instructions for important
details that will help during the construction.
SPECIAL NOTE: Baseboards for Frame
These instructions describe installing a baseboard under
the rafter feet (recommended) along each side of the
frame. The baseboard runs from the front to the back of the
frame. It is also used under the base rail of the end walls
(when equipped) to keep the building frame on the same
plane.
This baseboard is
not included
with the shipment and must
be supplied by the customer. Treated or recycled plastic
lumber works well for a baseboard.
The baseboard, when installed properly, helps prevent
the shelter from sinking into the ground when anchored.
Baseboards also provide a surface to attach rafter feet or
other building components.
Consult these instructions, or contact Customer Service for
additional information regarding baseboards.
Customer-Supplied
Baseboard
