34
© 2006 Directed Electronics—all rights reserved
The LED will stop flashing when the ignition is turned on.
rear defogger control
The rear defogger output can be remotely turned on/off any time using the remote control. The default setting
is
ON
.
To turn the rear defogger output OFF:
1. Press & release the
/
and
and
buttons of the remote control.
2. The parking lights will flash 2-times.
3. The rear defogger output will no longer activate when the vehicle is remote engine started.
NOTE:
If the remote engine start is On the lights will turn off then flash 2-times before returning
to their normal output and the defogger output, if active, will cease.
To turn the rear defogger output ON:
1. Press & release the
/
and
and
buttons of the remote control.
2. The parking lights will flash 3-times.
3. The rear defogger output will once again activate when the vehicle is remote engine started.
NOTE:
If the remote engine start is On the lights will turn off then flash 3-times before returning
to their normal output and the defogger output will activate as programmed.
LED SHUTDOWN
FLASHES
MODE
One
System timed out
Two
Over-rev shutdown
Three
Low or no RPM
Four
Transmitter Shutdown (or optional push-button)
Six
(+/-) Shutdown
Seven
(-) Neutral safety shutdown (H2/6 BLACK/WHITE)
Eight
Wait-to-start timed out