© 2006 Directed Electronics—all rights reserved
33
18 IGNITION CONTROLLED LOCK—ON,
OFF
:
When programmed ON the doors will lock when the key is on and all
doors are closed.
19 FACTORY ALARM DISARM—WITH UNLOCK,
BEFORE UNLOCK, remote engine start ONLY
:
In the default setting the
factory alarm disarm output will disarm the factory alarm system any time the button(s) controlling Unlock is pressed.
The “Before Unlock” output to disarms the factory alarm before the unlock output activates and before remote engine
start is activated. The “remote engine start Only” output disarms the factory alarm only before the remote engine
start is activated.
20 FACTORY ALARM DISARM PULSES—SINGLE,
DOUBLE
:
Selectable for a single or double-pulse for the vehicle’s
factory alarm disarm input requirements.
21 COMFORT CLOSURE—
ON
, OFF:
The system can be programmed to close the windows when the system is armed.
A 20-second output starts 200mS after the last lock pulse. The Comfort Closure output will be canceled if the unlock
button is pressed. If programmed ON, the lock output wire provides this function.
shutdown diagnostics
The unit has the ability to report the cause of the last shutdown of the remote engine start system. To enter diag-
nostic mode:
1.
Turn the ignition off.
2.
Press and
HOLD
the Program switch.
3.
Turn the ignition on and then off.
4.
Release the Program switch.
5.
Press and release the Program switch.
The LED will now report the last system shutdown by flashing for one minute in the following grouped patterns:
