![background image](http://html.mh-extra.com/html/cisco/at3400-alltouch/at3400-alltouch_user-manual_67039001.webp)
1
2
3
4
5
6
7
8
11
12
13
14
15
10
9
13
View VOD programs
14
Make on-screen selections
15
In STB Mode = Go Interactive
16
Record the selected program
17
Turn the volume up or down
18
List DVR recordings
19
Mute the volume
20
Return to TV program
21
Go back to the previous screen
Programming the AT3400
Manually
Use these steps to program
your AT3400 manually. Find your
manufacturer in the list of
TV Setup
Codes
and begin with the fi rst code
listed. If that code does not work,
repeat these steps with the next code
listed. Or scan for a code using the
steps in
Scanning for Codes
.
1. Hold the
TV
key until both device
keys begin to fl ash. Then release the
TV
key.
2. Enter the four-digit code for your TV.
After you press the fi rst digit, the TV
key lights up and remains on. When
you press the last digit, if the code is
valid, the TV key fl ashes three times.
3. Test the remote to make sure that it
controls the TV. If the functions do
not work, try the next code listed.
If none of the codes for your TV work,
try the steps in
Scanning for Codes
.
Scanning for Codes to Program
the TV
The AT3400 can scan all the codes for
your TV and fi nd the best match. Use
the steps below, or see the steps in
Programming the AT3400 Manually
.
1. Make sure that your TV is powered
on.
2. Hold the
TV
key until both device
keys begin to fl ash. Then release the
TV
key.
3. Press the
Power
key. The TV key
stops fl ashing and remains on.
4. Point the remote at your TV.
5. Hold the
or
key until your TV
turns off .
6. If the TV has been turned off in
Step 5, then press and release the
OK
key to lock the code. The TV
key fl ashes three times. Press the
Power
key to turn your TV back on.
Test the remote.
7. If the functions do not work properly,
try again from step 1.
Programming Volume Control
By default, your volume buttons operate
the set-top box, not the TV. Follow
these steps if you want to control
volume through your TV. A TV must be
programmed into the remote before
changes can be made to Volume
Control.
1. Hold the
STB
key until both device keys
begin to fl ash. Then release the
STB
key.
2. Hold the
key and press the
OK
key.
The STB key fl ashes. Release both
keys.
3. Press the
key. The STB key
stops fl ashing and remains on.
4. Press the
Volume -
key. The STB key
turns off while you press volume -
and turns on again when you release
Volume -.
5. Press the
TV
device key. The STB key
fl ashes three times.
If you want to revert to the original settings:
1. Hold the
STB
key until both device keys
begin to fl ash. Then release the
STB
key.
2. Hold the
key and press the
OK
key.
The STB key fl ashes. Release both
keys.
3. Press the
key. The STB key
stops fl ashing and remains on.
4. Press the
Volume -
key. The STB key
turns off while you press volume -
and turns on again when you release
Volume -.
5. Press the
STB
device key. The STB key
fl ashes three times.
Adjusting the Channel Lock
By default, your channel buttons
operate the set-top. Before changes
can be made to Channel Lock, a TV
must be programmed into the remote. If
you want the channel buttons to operate
the TV instead, follow these steps:
1. Press the
STB
key until both device
keys start to fl ash. Then release the
STB
key.
2. Hold the
key and press the
OK
key.
The
STB
key fl ashes. Release both
keys.
3. Press the
C
key.
4. Press the
Channel -
key.
5. Press the
OK
key. The STB key
fl ashes three times.
Repeat these steps if you want to revert
to the original settings.
Turning Off Master Power
By default, your Power button controls
the TV and set-top separately. Follow
these steps if you would like the Power
button to control the TV and set-top
TV Setup Codes
Abex 1114
Acer 1116
Action 1441,1503
Admiral 1393,1115,1131,1137
Advent 1190,1123,1124
Adventura 1117,1411
Aiko 1397,1130
Aiwa 1305,1314,1588,1462
Akai 1193,1051,1052,1097,
1098,1357,1365,1367,
1394,1145,1204,1205
Akura 1425,1499
Alaron 1415,1429,1432
Albatron 1435,1438
Alleron 1100
A-Mark 1403
Ambassador 1428
America
Action 1194,1430
Amtron 1195
Anam 1194,1430
Anam
National 1195,1395
AOC 1191,1192,1193,1196,
1403,1409,1418,1431,
1240,1242
AOC Envision 1210
Apex 1162,1006,1306,1233,
1589
Apex Digital 1188,1368,1132
Archer 1403
Astar 1200,1560
Audinac 1430
Audiovox 1194,1195,1099,1130,
1136,1403,1430,1434,
1202,1236
Aventura 1134
Axion 1311,1202,1456
Bang &
Olufsen 1201,1223,1224
Baysonic 1430
Belcor 1191,1409,1242
Bell & Howell 1393,1102,1143
Benq 1007,1016
Boxlight 1437
BPL 1432
Bradford 1194,1195,1430
Brillian 1278,1218
Brockwood 1191,1409,1242
Broksonic 1194,1307,1367,1391,
1137,1403,1232,1594
byd:sign 1446,1550
Candle 1191,1192,1193,1396,
1117,1411,1420,1242
Carnivale 1193
CCE 1414,1415,1416,1247
Celebrity 1177,1394
Celera 1188
Centurion 1191
Changhong 1188,1206,1207,1208
Cineral 1434
Citizen 1189,1191,1192,1193,
1195,1197,1396,1397,
1111,1130,1411,1417,
1420,1242
Clairtone 1431
Clarion 1194,1430
Coby 1308,1350,1209,1598
Colortyme 1191,1192,1242
Commercial
Solutions 1126
Concerto 1191,1192,1420,1242
Contec 1194,1427,1430,1431
Contec/Cony 1195,1199
Craig 1194,1195,1430
Crosley 1198,1225
Crown
1194,1195,1106,1417,1430
CTX 1008,1517
Curtis Mathes 1150,1191,1192,1193,
1197,1198,1102,1111,
1126,1131,1136,1142,
1143,1145,1417,1420,
1434,1225,1242
CXC 1194,1195,1430
Cytron 1010,1448,1575
Daewoo 1164,1189,1191,1192,
1196,1197,1261,1062,
1377,1397,1130,1136,
1409,1417,1434,1242
Daytron 1191,1192,1197,1409,
1242
De Graaf
1432
Dell 1327,1328,1216,1217,
1478,1479
Denon 1142,1494
DiamondVision 1551,1578,1579
Dimensia 1150
Dumont 1191,1113,1125,1409,
1242
Durabrand 1185,1187,1191,1194,
1134,1137,1403,1430
Dwin 1131
Dynex 1190
Electroband 1177,1394,1431
Electrograph 1140
Electrohome 1191,1192,1394,1395,
1242
Elite 1581
Emerson 1164,1167,1178,1189,
1191,1192,1194,1195,
1197,1199,1351,1364,
1371,1391,1398,1399,
1100,1102,1120,1134,
1137,1143,1409,1415,
1417,1428,1429,1430,
1431,1242,1554,1568
Emprex 1449,1566
Envision 1191,1192,1193,1242
Epson 1349,1139
ESA 1134
Finlandia 1432
Finlux 1424
Fisher 1009,1101,1102,
1143,1432
Frontech 1425
Fuijitsu 1063,1100,1429,
1520
Funai 1167,1194,1195,
1299,1387,1100,
1134,1429,1430,
1206,1207,1208
Futuretec 1194,1195,1425,
1430
Gataway 1180,1003,1140,
1146,1572
GE 1150,1161,1191,
1192,1315,1388,
1389,1395,1103,
1105,1126,1128,
1136,1434,1242,
1466
Go Video
1443
Goldstar 1191,1192,1193,
1196,1197,1199,
1390,1114,1409,
1242
Goldiente 1419,1420,1421,
1422,1423,1248
Granada 1432
Great Wall
1178
Grundig 1414
Grundy 1194,1195,1100,
1429,1430
The AT3400 AllTouch remote control
has been programmed to control
your Cisco® set-top box and can be
programmed to control your TV.
Before You Begin
Be sure that your television power cord
and your Cisco set-top box are not
plugged into the same wall outlet.
Install Batteries
The remote requires two alkaline AAA
batteries. A diagram inside the battery
compartment of the remote indicates
proper placement of the batteries.
Know Your Remote
The diagram below describes each key on
your remote. Functions may vary between
diff erent services.
Refer to the user guide for your set-top
for descriptions of specifi c functions.
1
Select TV operating keys
2
Turns the currently selected device
on and off
3
Select set-top box operating keys
4
Go to specifi c channels or menu
items
5
View the EPG
6
Move through on-screen menus
7
View more info
8
Display the menu
9
Go to the last channel viewed
10
Change the channel up and down
11
Control the recorded program
12
For future use
together. In order to make changes to
the Master Power feature, a TV must be
programmed into the remote.
1. Hold the
STB
button until both device
keys begin to fl ash.
2. Hold the
and press the
OK
key.
Release both keys.
3. Press the
Power
key, then the
STB
mode key, then the TV mode key, then
the
Power
key again. The STB key
fl ashes three times.
Follow these steps if you would like to
revert to the original settings:
1. Hold the
STB
button until both device
keys begin to fl ash.
2. Hold the
and press the
OK
key.
Release both keys.
3. Press the
Power
key twice. The STB
key fl ashes three times.
Recalling a TV Code
Follow these steps if you want to know
your TV code.
1. Hold the
TV
key until both device
keys begin to fl ash. Then release the
TV
key.
2. Press the
OK
key. The TV key
fl ashes each of the four digits in the
code, separated by pauses. A rapid
fl icker represents zero. So a code of
1032 will be shown as:
FLASH <pause> FLICKER
<pause> FLASH… FLASH…
FLASH… <pause> FLASH… FLASH
Write your code in the spaces
below:
___ ___ ___ ___
User Guide
AT3400 AllTouch
Remote Control
Learning Function – Learning
Commands
1. Line up the AT3400 end-to-end
with the second remote control
you want to learn from, as shown
below. Make sure the heads are
one to two inches apart.
2. Press and hold the
TV
key on the
AT3400 until both device keys
(TV, STB) begin to fl ash. Then
release the TV key.
3. Press and release the
GREEN/
LRN
key.
4. Press the key on the AT3400
that you want to learn the new
command. For example, if you
want the MUTE key on the
AT3400 to learn the TV MUTE
command from the second
remote, press the
MUTE
key on
the AT3400. The TV key LED
blinks once to indicate that the
AT3400 is ready to learn the
command.
5. On the second remote, press and
hold the key that you want the
AT3400 to learn (in this example,
MUTE) until the TV key on the
AT3400 blinks three times.
G
o Interactiv
e
LRN
Re
cordings
List
Record
RWD
BACK
SKIP
STOP
PAUSE
PLAY
FF
VOD
6. Continue learning other keys from
the second remote by pressing
the next button to teach on the
AT3400 and repeating step 5.
Note
: The TV LED blinks once if
there was an error in the learning
process. In this case, repeat steps
4 and 5.
7. Once the AT3400 has learned all
the buttons, press the
GREEN/
LRN
key. The TV LED blinks
three times to confi rm the
programming. Now, test all the
buttons to make sure they learned
correctly.
Learning Function – Clearing
Commands
To clear individual learned
commands:
1. Hold the
TV
key until both device
keys begin to fl ash. Then release
the TV key.
2. Press the
GREEN/LRN
key.
3. Press the key that you want to
clear, then press it a second time.
The TV LED blinks three times.
4. Repeat step 3 for each key you
want to clear. Press the
GREEN/
LRN
key. The TV LED blinks three
times.
To clear all the learned commands:
1. Hold the TV key until both device
keys begin to fl ash. Then release the
TV key.
2. Press the
GREEN/LRN
key.
3. Hold the TV key for more than 3
seconds. The TV LED blinks three
times.
Note
: The AT3400 only learns
functions after the TV is set. It does
not work in the factory default mode.
If the AT3400 has Channel Lock
enabled, the Numeric keys, Recent
key, and and Channel-
keys are not learned.
Handling Disposable Batteries
This product may contain disposable
batteries. Heed the following warning
and Battery Safety and Battery Disposal
instructions.
WARNING
: There is danger of
explosion if the battery is mishandled
or incorrectly replaced. Replace only
with the same type of battery. Do not
disassemble it or attempt to recharge
it outside the system. Do not crush,
puncture, dispose of in fi re, short
the external contacts, or expose to
water or other liquids. Dispose of
the battery in accordance with local
regulations and instructions from your
service provider.
T16083
G
o Interactiv
e
LRN
Record
Re
cordings
List
RWD
BACK
SKIP
STOP
PAUSE
PLAY
FF
VOD
5
3
7
2
9
13
15
20
21
17
4
6
14
8
1
19
18
10
11
12
16
Battery Safety
• Insert batteries correctly. There may
be a risk of explosion if the batteries
are incorrectly inserted.
• Do not attempt to recharge
‘disposable’ or ‘non-reusable’
batteries.
• Please follow instructions provided
for charging ‘rechargeable’ batteries.
• Replace batteries with the same or
equivalent type that we recommend.
• Do not expose batteries to excessive
heat (such as sunlight or fi re).
• Do not expose batteries to
temperatures above 100°C (212°F).
Battery Disposal
• The batteries may contain
substances that could be harmful to
the environment.
• Recycle or dispose of batteries
in accordance with the battery
manufacturer’s instructions and
local/national disposal and recycling
regulations.
• The batteries may contain perchlorate,
a known hazardous substance, so
special handling and disposal of
this product might be necessary.
For more information about
perchlorate and best management
practices for perchlorate-containing
substance, see
www.dtsc.ca.gov/
hazardouswaste/perchlorate
T16084
1-2
inch
1
2
3
4
5
6