Clare Controls 16-Channel NVR with PoE, Руководство пользователя

Страница: 22 / 188

Chapter 1: Introduction
Network Video Recorder User Manual 13
Figure 9: Older model 16-Channel and 32-Channel rear panel connections (models vary)
Table 9: 16-Channel and 32 Channel rear panel connections (models vary)
No. Name
Description
1 VIDEO OUT BNC connector for video output.
2 CVBS AUDIO OUT BNC connector for audio output. This connector is synchronized
with CVBS video output.
VGA AUDIO OUT BNC connector for audio output. This connector is synchronized
with VGA video output.
3 LINE IN BNC connector for audio input.
4 RS-232 Interface Connector for RS-232 devices.
5 VGA DB9 connector for VGA output. Display local video output and
menu.
6 HDMI HDMI video output connector.
7 eSATA (Optional) Connects external SATA HDD, CD/DVD-RM.
2 eSATA interfaces.
8 LAN Interface 1 network interface provided.
9 Termination Switch RS-485 termination switch.
Up position is not terminated.
Down position is terminated with 120 Ω resistance.
10 RS-485 Interface Connector for RS-485 devices. T+ and T- pins connect to R+ and
R- pins of PTZ receiver respectively.
Controller Port D+/D- pin connects to Ta, Tb pin of controller. For cascading
devices, the first NVR’s D+/D- pin connects with the D+/D- pin of
the next NVR.
ALARM IN Connector for alarm input.
ALARM OUT Connector for alarm output.
11 GROUND Ground (connect before starting the NVR).
12 AC 100 to 240V AC 100 to 240 V power supply.
13 POWER Switch for turning on/off the device.
14 USB interface Universal Serial Bus (USB) ports for additional devices such as
USB mouse and USB Hard Disk Drive (HDD).
15 Network Interfaces with PoE
function
Network interface for the cameras and to provide power over
Ethernet.