Clare Controls 16-Channel NVR with PoE, Руководство пользователя

Страница: 151 / 188

Chapter 11: HDD Management
140 Network Video Recorder User Manual
5. You can copy the quota settings of the current camera to other cameras if
required. Click the Copy button to enter the Copy Camera menu.
6. Select the camera(s) to configure with the same quota settings. You can also
check the check box of IP Camera to select all cameras.
7. Click OK to finish the Copy settings and return to the Storage Mode interface.
8. Click Apply to apply the settings.
Note: If the quota capacity is set to “0,” then all cameras will use the total
capacity of HDD for record and picture capture.
Checking HDD status
You can check the status of the HDDs installed on the NVRs so that you can
take immediate action in case of an HDD failure.
To check the status on the General tab:
1. Enter the HDD Information interface (Menu > HDD > General).
2. Check the status of each HDD displayed in the list.