Clare Controls 16-Channel NVR with PoE, Руководство пользователя

Страница: 120 / 188

Chapter 9: Network Settings
Network Video Recorder User Manual 109
Configuring multicast
You can configure multicast to realize live view for more than 128 cameras
through the network for 64-Channel NVRs. You can connect over 64 cameras
using the multicast function for the 4-Channel NVR, 8-Channel NVR, and 32-
Channel NVR.
A multicast address spans the Class-D IP range from 224.0.0.0 to
239.255.255.255. We recommend that you use IP addresses ranging from
239.252.0.0 to 239.255.255.255.
To configure multicast:
1. Enter the Network Settings interface (Menu > Configuration > Network).
2. Click the More Settings tab.
3. Set multicast IP, as shown below. When adding a device to the Network
Video Surveillance Software, the multicast address must match the NVR’s
multicast IP.
4. Click Apply to save and exit the interface.
Note: The multicast function is supported by the network switch to which the
NVR connects.
Configuring RTSP
The RTSP (Real Time Streaming Protocol) is a network control protocol used in
communication systems to control streaming media servers.
To configure RTSP:
1. Enter the Network Settings menu (Menu >Configuration> Network).
2. Click the More Settings tab.
3. Enter the RTSP port number in the RTSP Port field.
The default RTSP port is 554. You can change it according to your
requirements.
4. Click Apply to save and exit the menu.