Clare Controls 16-Channel NVR with PoE, Руководство пользователя

Страница: 123 / 188

Chapter 9: Network Settings
112 Network Video Recorder User Manual
Configuring email
You can configure the system to send an email notification to all designated
users when an alarm event is detected, an alarm or motion event is detected, or
the administrator password is changed.
Before configuring the email settings, you must connect the NVR to a local area
network (LAN) that maintains an SMTP mail server. You must also connect the
network to either an intranet or the Internet, depending on the location of the
email accounts where you want to send notifications.
To configure email:
1. Enter the Network Settings interface (Menu > Configuration > Network).
2. Set the IPv4 address, IPv4 subnet mask, IPv4 gateway, and the preferred
DNS server in the Network Settings menu.
3. Click Apply to save the settings.
4. Click the Email tab.
5. Configure the following email settings.
Enable Server Authentication (optional): Check the check box to enable
the server authentication feature.
User Name : The user account of sender’s email for SMTP server
authentication.
Password : The password of sender’s email for SMTP server authentication.
SMTP Server: The SMTP server IP address or host name (e.g.,
smtp.263xmail.com).
SMTP Port No.: The SMTP port. The default TCP/IP port used for SMTP is
25.
Enable SSL (optional): Check the check box to enable SSL, if required by
the SMTP server.