Clare Controls 16-Channel NVR with PoE, Руководство пользователя

Страница: 119 / 188

Chapter 9: Network Settings
108 Network Video Recorder User Manual
3. Check the SNMP check box to enable it.
4. Configure the following SNMP settings.
Trap Address: IP Address of SNMP host.
Trap Port
: Port of SNMP host.
5. Click Apply to save and exit the interface.
Note: Before setting the SNMP, download the SNMP software and configure it to
receive the device information via SNMP port. By setting the trap address, the
NVR can send the alarm event and exception message to the surveillance
center.
Configuring a remote alarm host
With a remote alarm host configured, the NVR will send the alarm event or
exception message to the host when an alarm is triggered. The remote alarm
host must have the Network Video Surveillance software installed.
Steps:
1. Enter the Network Settings interface (Menu > Configuration > Network).
2. Click the More Settings
tab to enter the More Settings interface.
3. Enter Alarm Host IP and Alarm Host Port in the text fields.
The Alarm Host IP refers to the IP address of the remote PC on which the
Network Video Surveillance Software is installed. The alarm host port must
match the alarm monitoring port configured in the software.
4. Click Apply to save and exit the interface.