Clare Controls 16-Channel NVR with PoE Скачать руководство пользователя страница 133

Страница: 133 / 188

Chapter 10: RAID

122

Network Video Recorder User Manual

3. Edit the Array Name; set the RAID Level to RAID 0, RAID 1, RAID 5 or RAID

10; and select the Physical Disk that you want to configure array.

Notes



If you choose RAID 0, at least two HDDs are installed.



If you choose RAID 1, two HDDs are configured for RAID 1.



If you choose RAID 5, at least three HDDs are installed.



If you choose RAID 10, four, six, or eight HDDs are configured for RAID

10.

4. Click OK to create an array.

Note:

If the number of HDDs you select is not compatible with the

requirement of the RAID level, the error dialog displays.

5. Click the Array tab to view the successfully created array.

6. Click to select an array, and then click Create Virtual Disk to enter the Create

Virtual Disk interface.

Note:

The device supports creating up to eight virtual disks.

Содержание 16-Channel NVR with PoE





























































































































































































Результаты поиска

Содержание 16-Channel NVR with PoE

Отзывы:

Бренды по названию

Популярные бренды

Clare Controls 16-Channel NVR with PoE, Руководство пользователя

Результаты поиска

Содержание 16-Channel NVR with PoE

Отзывы:

Бренды по названию

Популярные бренды