Citronix ci5200, Техническое и сервисное руководство

Страница: 220 / 288

ci5000 Series Printer Technical Service Manual
Version 0.1 6-76
1. Loose the Ink tank hold down screw (described above in Changing Ink, Makeup or Ink, Makeup
Tank).
2. Remove the ink fill tube by pressing the top of the quick disconnect fitting located on the top of the
Ink Manifold (described above in Changing Ink, Makeup or Ink, Makeup Tank) and pulling the
tube up and out.
3. Use a 5/32” allen wrench, turn the two manifold
locking cams ¼ turn counterclockwise (described
above in Changing Ink, Makeup or Ink, Makeup Tank).
4. Lift the Manifold out of the tank and tilt it so that it sets tilted on the Ink tank.
5. Use a 1/8” allen wrench, remove the grub screw
circled above in Pic 1. Clean with the proper
solvent and set aside.
6. Use a 1/16” allen wrench, insert into the hole in the manifold and carefully unscrew the restrictor
from the manifold.
7. Carefully rinse the hole and inspect for dirt and/or any other debris.
8. If the restrictor is clogged, simply wash with Cleaning Solvent until the clog is removed. Hold the
restrictor up to the light to inspect for possible blockages.
9. Reinstall or replace the restrictor into the manifold. Screw it into the manifold 10 complete turns
and refit the grub screw until the grub screw o-ring can be seen around the head of the grub
screw. DO NOT overtighten as this can cause damage to the Ink Manifold.
10. Reinsert the Ink Manifold back into the Ink tank and make sure the manifold gasket seals all the
way around and is flat between the tank and Manifold and secure the two manifold locking cams
by turning them ¼ turn clockwise.
11. Reinsert the Ink Manifold and tank assembly back in place and secure the tank hold down screw.
12. Refit the fill tube into the quick disconnect on the manifold.
13. Refit the back cover and tighten the locking cam.