Citronix ci5200, Техническое и сервисное руководство

Страница: 191 / 288

ci5000 Series Printer Technical Service Manual
Version 0.1 6-47
Fig 1
Corrective Action:
1. Inspect the Make-up level thru the tank and ensure the level is in fact high.
a. If not high
i.
check the level rod wires for continuity back to the CPU board…if good
ii. replace the CPU board
2. If the level is high, remove Make-up by;
a. Turn the power off using the appropriate shutdown routine.
b. Remov
e the Ink System housing cover by using a 5/32” Allen
and turning ¼ turn
clockwise in the lock, then lift the cover up and off.
c. Remove the Service Module base by removing the securing screw holding the bracket to
the back wall of the Ink System and set the assembly aside.
d. Remove the Make-up fill port and tube by first removing the 3 screws securing the port to
the cabinet. Then pressing the top of the quick disconnect fitting located on the top of the
Manifold (shown in Pic 1) and pulling the tube up and out of the top of the Makeup
Manifold.
e.
Using a 5/32”
Allen wrench, turn the two manifold securing cams ¼ turn counterclockwise.
f. While lifting the Manifold out of the tank, carefully remove the tank out of the Ink
compartment of the cabinet. Use absorbent cloths to collect excess Makeup from the
pickup tube.
g. Remove Makeup from the Make-up tank until the level is equal to the midlevel seam of the
tank and dispose of in accordance with local regulations.
h. Replace Makeup tank by reversing the above steps.
i. Refit the Ink System housing cover and restart the printer.