Citrix NetScaler SDX 11500, Руководство пользователя

Страница: 122 / 253

© 1999-2017 Citrix Systems, Inc. All rights reserved. p.122 https://docs.citrix.com
0/1 00:00:00:00:00:00
0/2 00:00:00:00:00:08
1/1 00:00:00:00:00:10
1/2 00:00:00:00:00:18
1/3 00:00:00:00:00:20
1/4 00:00:00:00:00:28
1/5 00:00:00:00:00:30
1/6 00:00:00:00:00:38
1/7 00:00:00:00:00:40
1/8 00:00:00:00:00:48
10/1 00:00:00:00:00:50
10/2 00:00:00:00:00:90
Physical Interface Base MAC Address
The base MAC address for the management ports is for reference only. The Management Service generates MAC
addresses, on the basis of the base MAC address, for 1/x and 10/x ports only.
Note: You cannot assign a base MAC address to a channel.
To set the base MAC address for an interface and generate a range of MAC
addresses
1. On the Configuration tab, navigate to System > Interfaces and select the interface for which you want to set the MAC
address.
2. In the Modify Interface dialog box, select Add MAC Address, and then set the following parameters:
Add MAC Address— Assign a base MAC address to the interface. If you do not select this option, XenServer assigns a
MAC address to the virtual interface.
Base MAC Address— Enter the base MAC address. The Management Service uses this address to generate a MAC
address for a virtual interface associated with an instance.
Range— Specify the MAC addresses allowed for the virtual interfaces that are assigned to this physical interface.
These MAC addresses cannot be assigned to any other physical interface. For example, on a 1G interface, if the base
MAC address is 00:00:00:00:00:00 and range is set to 8, a MAC address between 00:00:00:00:00:00 and
00:00:00:00:00:08 cannot be assigned to another physical interface. Maximum limit for a 1G interface is 8. Maximum
limit for a 10G interface is 64.