Citrix NetScaler SDX 11500 Скачать руководство пользователя страница 113

Страница: 113 / 253

p.113

https://docs.citrix.com

Active

The logical drive is fully active, disk I/O and/or resync can
be happening.

Clean

The logical drive is active, but does not have any pending
write operations.

Recovering

All data on the logical drive is being written from the
running array to ﬁll up a new disk with all the relevant data.

Resync

Data on the array is being synchronized from the running
array. Data that is not in sync with the running array is
added to this array.

The RAID state of a logical drive at times may reﬂect a combination of above states as below:

clean, degraded

Applies to a degraded RAID 1 where one of the drives has failed or is ofﬂine

active, degraded

Applies to a degraded RAID 1 where one of the drives has failed or is ofﬂine

active, degraded, resyncing

Applies to a degraded RAID 1, where data on both the drives is in the process of being synchronized.

clean, degraded, recovering

Applies to a degraded RAID 1, where a new drive is being ﬁlled up with all the relevant data.

You can also view the details of the physical drives associated with the logical drive by selecting the logical drive and
clicking Show Physical Drives.

To create a new logical drive

1. Navigate to Configuration > System > RAID, and select the Logical Drives tab.

2. Select md_d2 for Slot5, Slot6 or md_d3 for Slot7, Slot8.
3. Click Create.

4. In the Create Logical Disk dialog box, you can select the Force Clean Physical Disks option to erase any existing RAID

metadata on the drives.

5. Click Create.

Physical Drives

Navigate to Conﬁguration > System > RAID > Physical Drives tab, to view the following information:

Slot - Physical slot associated with the physical drive.

Содержание NetScaler SDX 11500

























































































































































































































































Результаты поиска

Содержание NetScaler SDX 11500

Отзывы:

Бренды по названию

Популярные бренды

Citrix NetScaler SDX 11500, Руководство пользователя

Результаты поиска

Содержание NetScaler SDX 11500

Отзывы:

Бренды по названию

Популярные бренды