Citrix ADC MPX 10500 Скачать руководство пользователя страница 97

Страница: 97 / 176

Citrix ADC MPX

sh raid

Output:

RAID1 status

DEGRADED

Drive

ONLINE

Done

From the shell, confirm that drive 1/SSD 2 has failed, RAID status reports DEGRADED and drive 1/SSD
2 reports MISSING, or not present in the output.

1. At the Citrix ADC command prompt, switch to the shell prompt. Type:

shell

2. Check the status of the RAID array. SSD2 shows missing or is not present in the output.

Command:

root@ns

atacontrol status

ar0

Output:

ar0

ATA RAID1 status

DEGRADED

subdisks

ad4

ONLINE

1 ----

MISSING

ar0

ATA RAID1 status

DEGRADED

subdisks

ad4

ONLINE

Note:

Drive numbering changes in the shell: SSD 1 reports as drive 0 and SSD 2 as drive 1.

Perform the following steps to restore the RAID array to health by using the

atacontrol

utility.

1. Detach a failed drive. The failed drive is replaced with a new FRU drive.

2. Attach the FRU drive.

3. Add the FRU drive to the RAID array.

4. Verify the replacement drive is recognized.

5. Start the rebuild process.

6. Monitor the rebuild process.

Содержание ADC MPX 10500













































































































































































Результаты поиска

Содержание ADC MPX 10500

Отзывы:

Бренды по названию

Популярные бренды

Citrix ADC MPX 10500, Руководство пользователя

Результаты поиска

Содержание ADC MPX 10500

Отзывы:

Бренды по названию

Популярные бренды