Citrix ADC MPX
• Laser radiation when open. Do not stare into the beam, do not view directly with optical instru-
ments, and avoid direct exposure to the beam.
Statement 3
:
Caution:
Never remove the cover on a power supply or any part that has the following label attached.
Hazardous voltage, current, and energy levels are present inside any component that has this label
attached. There are no serviceable parts inside these components. If you suspect a problem with one
of these parts, contact a service technician.
Statement 4
:
Danger: Overloading a branch circuit is potentially a fire hazard and a shock hazard under certain con-
ditions. To avoid these hazards, ensure that your system electrical requirements do not exceed branch
circuit protection requirements. See the information that is provided with your device for electrical
specifications.
Statement 5 (applies to Citrix appliances with -48 VDC input)
:
Caution: This equipment is designed to permit the connection of the earthed conductor of the DC sup-
ply circuit to the earthing conductor at the equipment. If this connection is made, all of the following
conditions must be met:
• This equipment shall be connected directly to the DC supply system earthing electrode conduc-
tor or to a bonding jumper from an earthing terminal bar or bus to which the DC supply system
earthing electrode conductor is connected.
• This equipment shall be located in the same immediate area (such as, adjacent cabinets) as any
other equipment that has a connection between the earthed conductor of the same DC supply
circuit and the earthing conductor, and also the point of earthing of the DC system. The DC
system shall not be earthed elsewhere.
• The DC supply source shall be located within the same premises as this equipment.
• Switching or disconnecting devices shall not be in the earthed circuit conductor between the
DC source and the point of connection of the earthing electrode conductor.
© 1999-2019 Citrix Systems, Inc. All rights reserved.
107
