Citrix ADC MPX 10500 Скачать руководство пользователя страница 76

Страница: 76 / 176

Citrix ADC MPX

Citrix ADC MPX 26xxx

October 25, 2019

The Citrix ADC MPX 26100/26160/26200 appliances are 2U appliances. These appliances have two 14-

core processors and 256 GB of memory. The appliance has eight 50G and sixteen 25G network ports.

For information about the software releases supported on the Citrix ADC hardware platforms, see

Cit-

rix ADC MPX hardware software compatibility matrix

The following figure shows the front panel of the Citrix ADC MPX 26xxx appliances.

Figure 1. Citrix ADC MPX 26xxx, front panel

The Citrix ADC MPX 26xxx appliances have the following ports:

• RS232 serial console port.
• One 10/100/1000Base-T RJ45 copper Ethernet LOM Port. Use this port to remotely monitor and

manage the appliance independently of the Citrix ADC software.

• Two 10/100/1000Base-T RJ45 copper Ethernet Management Ports, numbered 0/1 and 0/2. These

ports are used to connect directly to the appliance for Citrix ADC administration functions.

• Eight 50G ports, numbered 50/1 to 50/8.
• Sixteen 25G ports, numbered 25/1 through 25/16.

The following figure shows the back panel of the MPX 26xxx appliances.

Figure 2. Citrix ADC MPX 26xxx, back panel

The following components are visible on the back panel of the Citrix ADC MPX 26xxx appliances:

• Two 480 GB removable solid-state drive (SSD). These appliances have a redundant array of in-

dependent disks (RAID) devices. In a RAID configuration, the same data is stored on multiple

Содержание ADC MPX 10500













































































































































































Результаты поиска

Содержание ADC MPX 10500

Отзывы:

Бренды по названию

Популярные бренды

Citrix ADC MPX 10500, Руководство пользователя

Результаты поиска

Содержание ADC MPX 10500

Отзывы:

Бренды по названию

Популярные бренды