Citizen CT-D150, Справочник по командам

Страница: 351 / 512

Support
model
CT-S280 CT-S300 CT-S2000 CT-S4000 CT-S251 CT-D150/E351
CT-S281 CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
CT-D151/E651
- 350 -
CT-E651
• a
＝
151: When Bluetooth Security/Connect Device is specified
Setting Status Sending Data
Stored
Value
Security /
Connect Device
1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
1 Low / All 49(“1”) - - - -
2 Middle / All 50(“2”) - - - -
3 Middle / Paired 51(“3”) - - - -
4 High / All 52(“4”) - - - -
5 High / Paired 53(“5”) - - - -
• a
＝
155: When Bluetooth Device Scan is specified
Setting Status Sending Data
Stored
Value
BT Device Scan 1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
1 No Response 49(“1”) - - - -
2 Discoverable 50(“2”) - - - -
• a
＝
156: When Bluetooth Auto Reconnect is specified
Setting Status Sending Data
Stored
Value
Auto Reconnect
1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
1 Invalid 49(“1”) - - - -
2 Valid 50(“2”) - - - -
• a=202: Input buffer full Busy output/cancel timing
Setting Status Sending Data
Stored
Value
BUSY
Output/Cancel
1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
1 49(“1”) - - - -
2 50(“2”) - - - -
3 51(“3”) - - - -
4 52(“4”) - - - -
• a=212: When DMA (Direct Memory Access) control of serial communication is specified
Setting Status Sending Data
Stored
Value
DMA control 1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
1 Invalid 49(“1”) - - - -
2 Valid 50(“2”) - - - -
• a=213: When the flow control of virtual COM is specified.
Setting Status Sending Data
Stored
Value
Flow control 1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
1 PC setting 49(“1”) - - - -
2 DTR/DSR 50(“2”) - - - -
3 XON/XOF 51(“3”) - - - -
• a=214: When Kanji is specified
Setting Status Sending Data
Stored
Value
Kanji 1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
1 OFF 49(“1”) - - - -
2 ON 50(“2”) - - - -