Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 91 -
[Caution]
[The specification which is common to the model]
• This command is valid for all characters (alphanumeric, kana, and kanji) except for HRI characters.
• This command is ignored if either the vertical magnification or horizontal magnification is out of the defined
range.
• In PAGE MODE, the vertical direction means the top-bottom direction of each character. The horizontal
direction means the side-to-side direction of each character. If characters of different vertical magnification are
contained in a line, the baseline of each character is lined up.
• Horizontal and vertical magnification can also be specified/canceled by ESC ! but the setting of command last
processed is valid.
• In STANDARD MODE, the vertical direction is defined as the paper feed direction, and the horizontal
direction is defined as the direction perpendicular to the paper feed.
• Setting memory SW 3-7 to ON allows the horizontal and vertical relations to be interchanged when
90°-right-turnning of character is specified.
[Default]
n=0
[See Also]
Содержание CT-D150
Страница 425: ...424 3 1 10Codepage00Hto7FH PC864 Arabic...
Страница 427: ...426 3 1 12Codepage00Hto7FH Thaicode11...
Страница 428: ...427 3 1 13Codepage00Hto7FH Thaicode18...