Citizen CT-D150, Справочник по командам

Страница: 180 / 512

Support
model
CT-S280 CT-S300 CT-S2000 CT-S4000 CT-S251 CT-D150/E351
CT-S281 CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
CT-D151/E651
- 179 -
FS p n m
[Function] Printing the download NV bit images
[Code] <1C>H<70>H<n><m>
[Range] 1
≤n≤255, 0≤m≤3, 48≤m≤51
[Outline] [The specification which is common to the model]
• This command prints the download NV bit images (n) using a specified mode (m).
m Mode Name
Dot Density in
Vertical Direction
Dot Density in Horizontal
Direction
0, 48
NORMAL MODE
203dpi 203dpi
1, 49
DOUBLE WIDTH MODE
203dpi 101dpi
2, 50
DOUBLE HEIGHT MODE
101dpi 203dpi
3, 51
QUADRUPLE SIZE
MODE
101dpi 101dpi
• “n” denotes the number of the download bit image.
• “m” denotes the bit image mode.
[Caution] [The specification which is common to the model]
• When the specified NV bit image “n” is undefined, this command is invalid.
• When the STANDARD MODE is selected, this command is valid only when there is no data in the print
buffer.
• This command is invalid when PAGE MODE is selected.
• Any printing modes except the upside-down printing mode (i.e. emphasis, double strike, underlining,
character size, inverted character printing, 90°-right-turned) are not affected.
• When the printing area set by the functions GS L and GS W is not enough for one vertical line of the
download NV bit image, the line alone is dealt with as follows.
One vertical line of the bit image is 1 dot in NORMAL MODE (m = 0, 48) and DOUBLE HEIGHT MODE (m
= 2, 50), and it is 2 dots in double WIDTH MODE (m = 1, 49) and QUADRUPLE SIZE MODE (m = 3, 51).
(1) The printing area is extended to the right side within the limits of the printing area so that one vertical line
of the download NV bit image can be printed.
(2) When a sufficient printing area cannot be maintained even after executing (1), the printing area is
extended to the left side. (The left margin is reduced.)
• When the size of a bit image exceeds the limits of the printing area, the data within the limits of the printing
area will be printed but the parts exceeding the limit will not be printed.
• Regardless of the amount of line feed set with ESC 2 and ESC 3, NORMAL MODE and DOUBLE WIDTH
MODE execute a paper feed of (height “n” of NV bit image) dots while DOUBLE HEIGHT MODE and
QUADRUPLE SIZE MODE execute a paper feed of (height “n” of NV bit image x2) dots.
• At the completion of the bit image printing, the head of the line will be used for the next printing position and
normal data processing will take place.
[See Also] ESC * , FS q , GS / , GS v 0