1
Lock indicator
2
Slide Rail Hooks
Chapter 3 Installing the Wide Area Application Engine
Installing the Wide Area Application Engine
3-8
Cisco Wide Area Application Engine 7341, 7371, and 674 Hardware Installation Guide
OL-15012-02
Note
When locked in position, an indicator (labeled 1 in
Figure 3-5
) is visible on each
side of the appliance. To remove the appliance from the rack, lift up on the lock
indicator and slide the appliance forward.
Step 5
Lift the locking levers (labeled 1 in
Figure 3-6
) on the slide rails and slide the
appliance into the rack until it extends approximately 4 inches (10.16 cm) from
the edge of the rack.
Figure 3-6
Sliding in the WAE
185088
1
1
Locking levers
Step 6
Attach the cable-management assembly to the rear of the slide rail using a hinge
pin (labeled 1 in
Figure 3-7
). Attach the free end of the cable-management
assembly to the slide rail using a hinge pin.
Содержание WAE-674-K9 - Wide Area Application Engine 674
Страница 4: ......
