Cisco WAE-674-K9 - Wide Area Application Engine 674, Руководство по установке оборудования

Страница: 64 / 152

Chapter 5 WAE Inline Network Adapter
Inline Network Adapter Description
5-2
Cisco Wide Area Application Engine 7341, 7371, and 674 Hardware Installation Guide
OL-15012-02
Figure 5-1 Inline Network Adapter
159701
The Cisco WAE inline network adapter provides an inline traffic interception
capability for your appliance. When you configure the WAE appliance for inline
interception mode, you can set attributes to control which interfaces are to be used
over which VLANs. By default, the adapter operates on all inline-capable
interfaces and VLANs. You can configure the inline redirection feature using the
WAAS CLI or the WAAS Central Manager GUI.
The WAAS software defines two new interface types: A group interface that
represents an inline pair grouping and a port interface that represents the
individual port. These interfaces are referred to as inlineGroup and inlinePort.
InlineGroup interfaces are numbered using the format slot/group. The slot number
is the slot in which the adapter is inserted. (In the WAE 500 series and 600 series
appliances, you must insert the adapter in slot 1 only.) The group number is either
0 or 1 (each adapter has 2 group pairs). The group number is displayed on the
adapter label.
InlinePort interfaces are numbered slot/group/lan or slot/group/wan. The last
attribute is the LAN or WAN designator.
The inline network adapter also includes an onboard programmable watch dog
timer (WDT) controller that allows you to set the time to wait after a failure event,
such as a power outage or a kernel crash, before the unit begins to operate in
mechanical bypass mode. In mechanical bypass mode, traffic is bridged between
the LAN and WAN ports of each group. Mechanical bypass mode prevents the