Chapter 6 Troubleshooting the System Hardware
Symptoms and Solutions
6-32
Cisco Wide Area Application Engine 7341, 7371, and 674 Hardware Installation Guide
OL-15012-02
DASD
A hard disk drive error has
occurred.
The error pertains to DASD devices, which are
not supported in the WAAS software.
RAID
A RAID controller error has
occurred.
1.
Check the RAID controller
2.
Check the system error log. (See the
“Viewing Error Logs” section on
page 6-10
.)
FAN
A fan has failed, is operating too
slowly, or has been removed. The
LED next to the failing fan is on.
A failing fan can also cause the
TEMP LED to be lit.
Replace the failing fan.
TEMP
The temperature has exceeded one
of the following thresholds:
•
The internal temperature for
CPU1 or CPU2 has exceeded
207°F (97°C).
•
The ambient temperature has
exceeded 104°F (40°C).
A failing fan can cause the TEMP
LED to be lit.
1.
The ambient temperature must be within
normal operating specifications. See the
Appendix A, “Wide Area Application
Engine Hardware Specifications.”
2.
Ensure that fans are operating correctly,
and replace one if it has failed.
3.
Ensure that the air vents are not blocked.
Table 6-8
Diagnostic-Panel LED Error Definitions (continued)
Diagnostic-Panel
LED
Description
Cause and Action
Содержание WAE-674-K9 - Wide Area Application Engine 674
Страница 4: ......
