Administration
File Management
Cisco Small Business SG200 Series 8-port Smart Switch
67
3
Setting DHCP Auto Configuration
You can use the
DHCP Auto Configuration
page to enable and disable the feature,
configure TFTP server and file name settings, and view status information.
When DHCP Auto Configuration is enabled, it will be in the
Waiting for boot
options
state, until it receives the notification from the DHCP client. The DHCP
client triggers the Auto Install process when it receives the IP address from the
DHCP server, after which the status changes to
Processing DHCP/BOOTP
options, checking preconditions
.
The following messages might display:
•
Waiting for boot options
•
Processing DHCP/BOOTP options, checking preconditions
•
Downloading tftp://<tftp address>/<filename>
•
Applying downloaded configuration
•
Waiting for restart timeout
•
Saving the downloaded configuration
•
Stopped
•
AutoInstall is completed.
•
AutoInstall process is terminated:File <filename>
validation failed.
•
AutoInstall process is terminated:Failed to save the
downloaded configuration file<bootfile> to start-up
configuration.
•
AutoInstall process terminated:Startup config is created
manually.
•
AutoInstall process is terminated :Boot file matched
with the last downloaded file.
•
AutoInstall process is terminated:Failed to resolve the
boot file name.
