Cisco Nexus 9396PX, Руководство по установке оборудования

Страница: 29 / 74

Three customer-supplied screws (typically M6 x 10
mm screws or the appropriate screws for the rack) to
hold each side of the chassis to the two-post rack. 1
Step 2 Use the second person to secure the three customer-supplied rack-mount screws (typically M6 x 10 mm or other appropriate
screws for the rack) on each center-mount bracket to attach the chassis to the rack. Tighten each screw to the appropriate
torque setting for the screws (for M6 x 10 mm screws, use 40 in-lbs [4.5 N·m] of torque).
Installing the Chassis in a Four-Post Rack
Before you install the chassis, be sure that the rack is fully secured to the data center floor.
Installing the Switch using the NXK-ACC-RMK-2RU Rack-mount Kit
To install the switch, you must attach mounting brackets to the rack, install slider rails on the rear of the rack,
slide the switch onto the slider rails, install the retainer brackets, and secure the switch to the rack with the
retainer clips. Typically, the front of the rack is the side easiest to access for maintenance.
You must supply the eight 10-32 or 12-24 screws required to mount the slider rails and switch to the rack. Note
Before you begin
• You have inspected the switch shipment to ensure that you have everything ordered.
• Make sure that the switch rack-mount kit includes the following parts:
• Rack-mount brackets (2)
• Rack-mount retainer brackets (2)
• Rack-mount slider rails (2)
Cisco Nexus 9396PX ACI-Mode Switch Hardware Installation Guide
19
Installing the Chassis
Installing the Chassis in a Four-Post Rack