manualshive.com logo in svg

Cisco Nexus 5000 Series, Руководство по настройке CLI, Страница: 648 / 660

Поделиться
Скачать
Cisco Nexus 5000 Series Скачать руководство пользователя страница 648

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-6

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Troubleshooting

Troubleshooting Fibre Channel

The trace frame is routed normally through the network until it reaches the far edge of the fabric. When 
the frame reaches the edge of the fabric (the F port connected to the end node with the given port WWN 
or the FC ID), the frame is looped back (swapping the source ID and the destination ID) to the originator.

If the destination cannot be reached, the path discovery starts, which traces the path up to the point of 
failure.

Note

The fctrace feature works only on TE ports. Make sure that only TE ports exist in the path to the 
destination. If there is an E port in the path, the fctrace frame is dropped by that switch. Also, fctrace 
times out in the originator, and path discovery does not start.

To perform the fctrace operation, perform one of these tasks:

 

Command

Purpose

switch# 

fctrace fcid 0xd70000 vsan 1

Route present for :

0xd70000 

20:00:00:0b:46:00:02:82(0xfffcd5) 

Timestamp Invalid.

20:00:00:05:30:00:18:db(0xfffcd7) 

Timestamp Invalid.

20:00:00:05:30:00:18:db(0xfffcd7) 

Invokes fctrace for the specified FC ID of 
the destination N port.

switch# 

fctrace pwwn 21:00:00:e0:8b:06:d9:1d vsan 1 

timeout 5

Route present for : 21:00:00:e0:8b:06:d9:1d

20:00:00:0b:46:00:02:82(0xfffcd5) 

Timestamp Invalid.

20:00:00:05:30:00:18:db(0xfffcd7) 

Timestamp Invalid.

20:00:00:05:30:00:18:db(0xfffcd7)

Invokes fctrace using the pWWN of the 
destination N port.

By default the period to wait before 
timing out is 5 seconds, The range is from 
one through 10 seconds.

switch# 

fctrace device-alias disk1 v 1

Route present for : 22:00:00:0c:50:02:ce:f8

20:00:00:05:30:00:31:1e(0xfffca9)

Invokes fctrace using the device alias of 
the destination N port.

Содержание Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов