manualshive.com logo in svg

Cisco Nexus 5000 Series, Руководство по настройке CLI, Страница: 563 / 660

Поделиться
Скачать
Cisco Nexus 5000 Series Скачать руководство пользователя страница 563

C H A P T E R

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-1

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

1

Discovering SCSI Targets

This chapter describes the SCSI LUN discovery feature provided in switches in the Cisco Nexus 5000 
Series. It includes the following sections:

•

Information About SCSI LUN Discovery, page 1-1

•

Displaying SCSI LUN Information, page 1-3

Information About SCSI LUN Discovery

Small Computer System Interface (SCSI) targets include disks, tapes, and other storage devices. These 
targets do not register logical unit numbers (LUNs) with the name server. 

The name server requires LUN information for the following reasons:

•

To display LUN storage device information so that a Network Management System (NMS) can 
access this information.

•

To report device capacity, serial number, and device ID information.

•

To register the initiator and target features with the name server.

The SCSI LUN discovery feature uses the local domain controller Fibre Channel address. It uses the 
local domain controller as the source FC ID, and performs SCSI INQUIRY, REPORT LUNS, and READ 
CAPACITY commands on SCSI devices.

The SCSI LUN discovery feature is initiated on demand, through CLI or SNMP. This information is also 
synchronized with neighboring switches, if those switches belong to the Cisco Nexus 5000 Series.

This section includes the following topics:

•

About Starting SCSI LUN Discovery, page 1-1

•

Starting SCSI LUN Discovery, page 1-2

•

About Initiating Customized Discovery, page 1-2

•

Initiating Customized Discovery, page 1-2

About Starting SCSI LUN Discovery

SCSI LUN discovery is done on demand.

Only Nx ports that are present in the name server database and that are registered as FC4 Type = 
SCSI_FCP are discovered.

Содержание Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов