manualshive.com logo in svg

Cisco Nexus 5000 Series, Руководство по настройке CLI, Страница: 541 / 660

Поделиться
Скачать
Cisco Nexus 5000 Series Скачать руководство пользователя страница 541

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-7

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring Fibre Channel Routing Services and Protocols

FSPF Interface Configuration

About Dead Time Intervals

You can set the FSPF dead time interval to specify the maximum interval for which a hello message must 
be received before the neighbor is considered lost and removed from the database. The integer value can 
range from 1 to 65,535 seconds.

Note

This value must be the same in the ports at both ends of the ISL.

Caution

An error is reported at the command prompt if the configured dead time interval is less than the hello 
time interval.

Configuring Dead Time Intervals

To configure the FSPF dead time interval, perform this task:

About Retransmitting Intervals

You can specify the time after which an unacknowledged link state update should be transmitted on the 
interface. The integer value to specify retransmit intervals can range from 1 to 65,535 seconds.

Note

This value must be the same on the switches on both ends of the interface.

Step 2

switch(config)# 

interface fc 

slot

/

port

switch(config-if)#

Configures the specified interface, or if 
already configured, enters configuration 
mode for the specified interface.

Step 3

switch(config-if)# 

fspf hello-interval 

value

 vsan 

vsan-id

switch(config-if)#

Specifies the hello message interval to 
verify the health of the link in VSAN 175. 
The default is 20 seconds.

Command

Purpose

Command

Purpose

Step 1

switch# 

configuration terminal

switch(config)#

Enters configuration mode.

Step 2

switch(config)# 

interface fc 

slot

/

port

switch(config-if)#

Configures the specified interface, or if already 
configured, enters configuration mode for the 
specified interface.

Step 3

switch(config-if)# 

fspf dead-interval 

value

 vsan 

vsan-id

switch(config-if)#

Specifies the maximum interval for the specified 
VSAN before which a hello message must be 
received on the selected interface before the 
neighbor is considered lost. The default is 80 
seconds.

Содержание Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов