manualshive.com logo in svg

Cisco Nexus 5000 Series, Руководство по настройке CLI, Страница: 443 / 660

Поделиться
Скачать
Cisco Nexus 5000 Series Скачать руководство пользователя страница 443

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-11

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring Domain Parameters

Domain IDs

About CFS Distribution of Allowed Domain ID Lists

You can enable the distribution of the allowed domain ID list configuration information to all Cisco SAN 
switches in the fabric using the Cisco Fabric Services (CFS) infrastructure. This feature allows you to 
synchronize the configuration across the fabric from the console of a single switch. Because the same 
configuration is distributed to the entire VSAN, you can avoid possible misconfiguration and the 
possibility that two switches in the same VSAN have configured incompatible allowed domains.

Use CFS to distribute the allowed domain ID list to ensure consistency in the allowed domain ID lists 
on all switches in the VSAN.

Note

We recommend configuring the allowed domain ID list and committing it on the principal switch.

For more information about CFS, see 

Chapter 1, “Using Cisco Fabric Services.”

Enabling Distribution

CFS distribution of allowed domain ID lists is disabled by default. You must enable distribution on all 
switches to which you want to distribute the allowed domain ID lists.

To enable (or disable) allowed domain ID list configuration distribution, perform this task:

Locking the Fabric

The first action that modifies the existing configuration creates the pending configuration and locks the 
feature in the fabric. After you lock the fabric, the following conditions apply:

•

No other user can make any configuration changes to this feature.

•

A pending configuration is created by copying the active configuration. Subsequent modifications 
are made to the pending configuration and remain there until you commit the changes to the active 
configuration (and other switches in the fabric) or discard them.

Step 2

switch(config)#

 fcdomain allowed 

domain-id range 

vsan 

vsan-id

Configures the list to allow switches with 
the domain ID range in the specified VSAN.

switch(config)# 

no

 

fcdomain allowed 

domain-id 

range 

vsan 

vsan-id

Reverts to the factory default of allowing 
domain IDs from 1 through 239 in the 
specified VSAN.

Command

Purpose

Command

Purpose

Step 1

switch# 

configuration terminal

switch(config)#

Enters configuration mode.

Step 2

switch(config)# 

fcdomain distribute

Enables domain configuration distribution.

switch(config)# 

no fcdomain distribute

Disables (default) domain configuration 
distribution.

Содержание Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов