manualshive.com logo in svg

Cisco Nexus 5000 Series, Руководство по настройке CLI, Страница: 447 / 660

Поделиться
Скачать
Cisco Nexus 5000 Series Скачать руководство пользователя страница 447

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-15

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring Domain Parameters

FC IDs

About Persistent FC IDs

When persistent FC IDs are enabled, the following occurs:

•

The current FC IDs in use in the fcdomain are saved across reboots.

•

The fcdomain automatically populates the database with dynamic entries that the switch has learned 
about after a device (host or disk) is plugged into a port interface.

Note

If you connect to the switch from an AIX or HP-UX host, be sure to enable the persistent FC ID feature 
in the VSAN that connects these hosts.

Note

When persistent FC IDs are enabled, FC IDs cannot be changed after a reboot. FC IDs are enabled by 
default, but can be disabled for each VSAN. 

A persistent FC ID assigned to an F port can be moved across interfaces and can continue to maintain 
the same persistent FC ID. 

Enabling the Persistent FC ID Feature

To enable the persistent FC ID feature, perform this task:

Persistent FC ID Configuration Guidelines

When the persistent FC ID feature is enabled, you can enter the persistent FC ID submode and add static 
or dynamic entries in the FC ID database. By default, all added entries are static. Persistent FC IDs are 
configured on a per-VSAN basis. 

When manually configuring a persistent FC ID, follow these requirements:

•

Ensure that the persistent FC ID feature is enabled in the required VSAN.

•

Ensure that the required VSAN is an active VSAN. Persistent FC IDs can only be configured on 
active VSANs.

•

Verify that the domain part of the FC ID is the same as the runtime domain ID in the required VSAN. 
If the software detects a domain mismatch, the command is rejected.

•

Verify that the port field of the FC ID is 0 (zero) when configuring an area.

Command

Purpose

Step 1

switch# 

configuration terminal

Enters configuration mode.

Step 2

switch(config)# 

fcdomain fcid persistent vsan 

vsan-id

FCID(s) persistent feature is enabled.

Activates (default) persistency of FC 
IDs in the specified VSAN.

switch(config)#

 no fcdomain fcid persistent vsan 

vsan-id

Disables the FC ID persistency feature 
in the specified VSAN.

Содержание Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов