manualshive.com logo in svg

Cisco Nexus 5000 Series, Руководство по настройке CLI, Страница: 446 / 660

Поделиться
Скачать
Cisco Nexus 5000 Series Скачать руководство пользователя страница 446

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-14

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring Domain Parameters

FC IDs

Enabling Contiguous Domain ID Assignments

To enable contiguous domains in a specific VSAN (or a range of VSANs), perform this task:

FC IDs

When an N port logs into a Cisco Nexus 5000 Series switch, it is assigned an FC ID. By default, the 
persistent FC ID feature is enabled. If this feature is disabled, the following situations can occur:

•

An N port logs into a Cisco Nexus 5000 Series switch. The WWN of the requesting N port and the 
assigned FC ID are retained and stored in a volatile cache. The contents of this volatile cache are 
not saved across reboots. 

•

The switch is designed to preserve the binding FC ID to the WWN on a best-effort basis. For 
example, if one N port disconnects from the switch and its FC ID is requested by another device, 
this request is granted and the WWN with the initial FC ID association is released.

•

The volatile cache stores up to 4000 entries of WWN to FC ID binding. If this cache is full, a new 
(more recent) entry overwrites the oldest entry in the cache. In this case, the corresponding WWN 
to FC ID association for the oldest entry is lost.

•

N ports receive the same FC IDs if disconnected and reconnected to any port within the same switch 
(as long as it belongs to the same VSAN).

This section describes configuring FC IDs and includes the following topics:

•

About Persistent FC IDs, page 1-15

•

Enabling the Persistent FC ID Feature, page 1-15

•

Persistent FC ID Configuration Guidelines, page 1-15

•

Configuring Persistent FC IDs, page 1-16

•

About Unique Area FC IDs for HBAs, page 1-16

•

Configuring Unique Area FC IDs for an HBA, page 1-16

•

About Persistent FC ID Selective Purging, page 1-18

•

Purging Persistent FC IDs, page 1-18

Command

Purpose

Step 1

switch# 

configuration terminal

switch(config)#

Enters configuration mode.

Step 2

switch(config)# 

fcdomain contiguous-allocation 

vsan 

vsan-id

 - 

vsan-id

Enables the contiguous allocation option in the 
specified VSAN range.

Note

The 

contiguous-allocation 

option 

takes immediate effect at runtime. You 
do not need to restart the fcdomain.

switch(config)# 

no

 

fcdomain 

contiguous-allocation vsan 

vsan-id

Disables the contiguous allocation option and 
reverts it to the factory default in the specified 
VSAN.

Содержание Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов